SonicOS 7 System

VPN Integration with Layer 2 Bridged Mode

When configuring a VPN on an interface that is also configured for Layer 2 Bridged Mode, you must configure an additional route to ensure that incoming VPN traffic properly traverses the appliance.

To configure VPN integration with Layer 2 bridged mode

  1. Navigate to NETWORK | System > Interfaces.
  2. Click the Add icon. The Add Route Policy dialog displays.
  3. Configure the route as follows:
    • Source: ANY
    • Destination: custom-VPN-address-object (This is the address object for the local VPN tunnel IP address range.)
    • Service: ANY
    • Gateway: 0.0.0.0
    • Interface: X0
  4. Click OK.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden