SonicOS 7 System

31-Bit Network Environment Example

31-Bit Network Diagram

In this network environment, Host PC1 and Host PC2 can visit each other, while hosts in the LAN network can visit Host PC2.

To configure settings for this environment

  1. For Host PC1, add two route entries:
    • Route add 10.5.10.0 mask 255.255.255.0 15.6.8.10
    • Route add 10.102.234.0 mask 255.255.255.0 15.6.8.10
  1. For Host PC2, add two route entries:
    • Route add 10.5.10.0 mask 255.255.255.0 10.102.234.70
    • Route add 15.6.8.0 mask 255.255.255.0 10.102.234.70
  1. On the Cisco router (F0/0):
    • interface fastEthernet 0/0
    • ip address 10.5.10.120 255.255.255.254
  1. On the Cisco 2811, add one route entry:
    • !
    • ip route 15.6.8.0 255.255.255.0 10.5.10.120
    • !
  1. On the firewall, add one route entry to enable the WAN zone data flow from X2 to X5, and X5 to X2:
    • Any 10.102.234.0 Any X2 Default Gateway X2

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden