SonicOS 7 Switch Network
- SonicOS 7
- Overview
- Managing from a Firewall
- Adding a Switch to a Firewall with Zero-Touch
- Adding a Switch to a Firewall Manually
- Changing the Switch Configuration
- Upgrading Firmware
- Shutting Down the Switch
- Restarting the Switch
- Setting Up PoE
- Adding a VLAN
- Adding Static Routes
- Editing DNS
- Setting Up QoS
- Setting Up Users
- Setting Up 802.1X Authentication
- Daisy-Chaining Switches
- Connecting Access Points
- Modifying the MAC Address Table
- Checking Port Statistics
- Configuring Switch Topologies
- Configuring Basic Topologies
- Connecting the Switch Management Port to a Firewall
- Configuring a Common Uplink
- Configuring a Dedicated Uplink
- Configuring a Hybrid System with Common and Dedicated Uplinks
- Configuring Isolated Links for Management and Data Uplinks
- Configuring High Availability
- Configuring VLANs With Dedicated Uplinks
- Configuring a Link to SonicWall Access Points
- SonicWall Support
Enabling the Switch
If the Switch is offline, navigate to DEVICE > Switch Network > Overview and click on 3 dot menu of the Switch which is off-line and then click on Edit Switch to bring up the Switch configuration dialog box. Check if the Switch configuration details are correct including: IP address, serial number, and Switch Management interface.
Was This Article Helpful?
Help us to improve our support portal