• SonicOS 7
• Overview
  • Before Adding a Switch
  • Enabling the Switch
  • Setting Up Ports
  • Checking Switch Details
• Managing from a Firewall
  • Adding a Switch to a Firewall with Zero-Touch
  • Adding a Switch to a Firewall Manually
  • Changing the Switch Configuration
  • Upgrading Firmware
  • Shutting Down the Switch
  • Restarting the Switch
  • Setting Up PoE
  • Adding a VLAN
  • Adding Static Routes
  • Editing DNS
  • Setting Up QoS
  • Setting Up Users
  • Setting Up 802.1X Authentication
  • Daisy-Chaining Switches
  • Connecting Access Points
  • Modifying the MAC Address Table
  • Checking Port Statistics
• Configuring Switch Topologies
  • Configuring Basic Topologies
  • Connecting the Switch Management Port to a Firewall
  • Configuring a Common Uplink
  • Configuring a Dedicated Uplink
  • Configuring a Hybrid System with Common and Dedicated Uplinks
  • Configuring Isolated Links for Management and Data Uplinks
  • Configuring High Availability
    • Configuring HA and PortShields With Dedicated Uplinks
    • Configuring HA and PortShield With a Common Uplink
    • Configuring HA Using One Switch Management Port
    • Configuring HA Using Two Switch Management Ports
  • Configuring VLANs With Dedicated Uplinks
  • Configuring a Link to SonicWall Access Points
• SonicWall Support
  • About This Document

Setting Up PoE

To set up PoE limits per port, navigate to Device > Switch Network > Overview and click on List View. Select the click on the edit button for the port for PoE setup. Scroll down in the port configuration panel until the PoE settings appear.

The PoE+ Switches support Power over Ethernet (PoE) as defined by the IEEE 802.3af and 802.3at. The SWS12-8 PoE-enabled Switches support the -af standard and up to 15.4 Watts per port. The SWS12-10 and SWS14 series PoE-enabled Switches support the 30 Watts per port.

The Switches follow the standard PSE (Power Sourcing Equipment) pinout, whereby power is sent out over pins 1, 2, 3 and 6.

• PoE Admin Status
• Enabled - Enables the Device Discovery protocol and provides power to the device using the PoE module. The Device Discovery Protocol lets the device discover powered devices attached to device interfaces and learns their classification.
• Disabled - Disables the Device Discovery protocol and halts the power supply delivering power to the device using the PoE module.
• PoE Priority

Select the port priority if the power supply is low. The field default is Medium. For example, if the power supply is running at 99% usage, and port 1 is prioritized as high, but port 6 is prioritized as low, port 1 is prioritized to receive power and port 6 may be denied power. The possible field values are: 4.

• Low – Sets the PoE priority level as low.
• Medium – Sets the PoE priority level as medium.
• High – Sets the PoE priority level as high.
• Critical – Sets the PoE priority level as critical.
• PoE Power Limit Type
• Auto Class - 15.4 or 30 W per port.
• User Defined - Sets the maximum amount of power that can be delivered by a port.

The User Power Limit can only be implemented when the Auto Class value is set to User-Defined.