• SonicOS 7.0
• System Monitor
  • Using the Toolbar
  • Common Features
    • Legends
    • Tooltips
    • Changing Chart Format
    • Selecting IPv6/IPv4
    • Current, Minimum, Maximum Display
  • Multicore Monitor
  • Applications Bandwidth
  • Interface Usage
    • Packet Rate Monitor
    • Packet Size
  • Connection Usage
    • Active Connection Count
• Protocol Monitor
  • Enabling the Protocol Monitor
  • Using the Toolbar
  • Using Per-Chart Viewing Options
    • Legends
    • Tooltips
• Policy Monitor
  • Using the Toolbar
  • Common Features
    • Legends
    • Tooltips
    • Changing Chart Format
    • Scaling a Chart
  • Security Policy
  • NAT Policy
  • Route Policy
  • Decryption Policy
  • DoS Policy
• User Monitor
• Bandwidth Monitor
• SonicWall Support
  • About This Document

Scaling a Chart

The Scale box, , to the upper right of each chart, allows for automatic y-axis scaling or custom scaling of a chart.

• Auto (default) – Auto Y-Scaling, where the y-axis is scaled so it is just large enough to show the maximum data in the chart.
• <num>[<unit>] – The values for customized scaling must be a numeric integer. Specifying a unit is optional. If a unit is desired, four options are available:
  • K for Kilo
  • M for Mega
  • G for Giga

  • % for Percentage

  For example, if a custom scale of 100Kbps is desired, then 100K should be entered: The numeric integer 100 followed by the unit K.

  An invalid entry results in the default, Auto Y-Scaling, being used.