• SonicOS 7.0
• System Monitor
  • Using the Toolbar
  • Common Features
    • Legends
    • Tooltips
    • Changing Chart Format
    • Selecting IPv6/IPv4
    • Current, Minimum, Maximum Display
  • Multicore Monitor
  • Applications Bandwidth
  • Interface Usage
    • Packet Rate Monitor
    • Packet Size
  • Connection Usage
    • Active Connection Count
• Protocol Monitor
  • Enabling the Protocol Monitor
  • Using the Toolbar
  • Using Per-Chart Viewing Options
    • Legends
    • Tooltips
• Policy Monitor
  • Using the Toolbar
  • Common Features
    • Legends
    • Tooltips
    • Changing Chart Format
    • Scaling a Chart
  • Security Policy
  • NAT Policy
  • Route Policy
  • Decryption Policy
  • DoS Policy
• User Monitor
• Bandwidth Monitor
• SonicWall Support
  • About This Document

Selecting IPv6/IPv4

For complete information on the SonicOS implementation of IPv6, see the chapter on Configuring Interfaces for Pv6 in the SonicOS 7.1 System Administration Guide.

Real-Time Charts can be configured to see IPv4, IPv6 and both. Make the selection from the drop-down menu on the charts where this is an option.