• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Requirements
  • Files for Installation
  • Creating a MySonicWall Account
• Installing the SMA 500v for Hyper-V Virtual Appliance
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Downloading the SMA 500v for Hyper-V Virtual Appliance Software
  • Installing SMA 500v for Hyper-V
• Configuring the SMA 500v for Hyper-V Virtual Appliance
  • Connecting to the Console
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for Hyper-V
  • Registering an SMA 500v for Hyper-V in a Closed Network
  • De-registering an SMA 500v for Hyper-V
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Files for Installation

You use different files for fresh installations than you do when updating to a newer version.

SMA 500v for Hyper-V is available for download from www.MySonicWall.com. For a fresh install, the Virtual Hard Disk (VHD) file with a file name similar to the following format is available for import and deployment to your Hyper-V server:

• sw_smavm_eng_10.X.X.X_10.X.X_p_XXsv_XXXXXX.vhd