• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Requirements
  • Files for Installation
  • Creating a MySonicWall Account
• Installing the SMA 500v for Hyper-V Virtual Appliance
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Downloading the SMA 500v for Hyper-V Virtual Appliance Software
  • Installing SMA 500v for Hyper-V
• Configuring the SMA 500v for Hyper-V Virtual Appliance
  • Connecting to the Console
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for Hyper-V
  • Registering an SMA 500v for Hyper-V in a Closed Network
  • De-registering an SMA 500v for Hyper-V
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Installing the SMA 500v for Hyper-V Virtual Appliance

The SMA 500v for Hyper-V Virtual Appliance is installed by deploying a VHD file to your Hyper-V server. Each VHD file contains all software components related to SMA 500v for Hyper-V.

You can deploy the VHD files as needed for your SMA 500v for Hyper-V environment. The SMA 500v for Hyper-V can be configured for a single server or in a distributed environment on multiple servers.

• Preparing the Windows Server System
• Creating Virtual Switches in Hyper-V
• Downloading the SMA 500v for Hyper-V Virtual Appliance Software
• Installing SMA 500v for Hyper-V