• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Configuring the SMA 500v for AWS Virtual Appliance

This section describes how to power on and configure basic settings on the SMA 500v for AWS Virtual Appliance, including virtual hardware settings and networking settings.

• Powering the Virtual Appliance On or Off
• Connecting to the Web Interface
• Connecting to the Command Line Interface
• Using the Command Line Interface
• Configuring Settings on the Appliance Web Interface