• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for AWS Virtual Appliance
  • Installing SMA 500v for AWS
• Configuring the SMA 500v for AWS Virtual Appliance
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for AWS
  • De-registering an SMA 500v for AWS
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Obtaining the Latest Image Version

To obtain a new SMA 500v for AWS image file for your security appliance

1. Go to www.MySonicWall.com and connect to your MySonicWall account.

   If you have already registered your SMA 500v for AWS and you chose to be notified when new firmware updates are available on the System > Settings page, you are automatically notified of any updates available for your model.

2. Copy the new SMA 500v for AWS image file to a directory on your management station. For the Virtual Appliance, this is a file such as:

   sw_500vaws_eng_10.x.x.x_10.x.x_p_xxsv_xxxxxxx.sig