• NSM Closed Network 2.2
• Overview
  • About Network Security Manager
  • Closed Network Description
  • Conventions
    • Guide Conventions
    • UI Conventions
  • Related Documents
• System Requirements
  • Browser Levels
  • Minimum System Configuration
  • MySonicWall
  • Firewall Types and Firmware
• Deploying NSM
• NSM Licensing
  • MSW Configuration
  • Enabling Closed Network
  • Associating the Nodes
  • Generating the Encrypted Files
• Getting Started with the Closed Network NSM
  • Configuring Closed Network NSM
  • Adding Firewalls
• SonicWall Support
  • About This Document

Configuring Closed Network NSM

After you complete the Closed Network setup on MySonicWall, you can go your NSM system to import the licenses.

1. Log in to your NSM system using your administrator credentials.

2. Navigate to Manager View | HOME > Settings > Closed Network.

   

3. On the Import Signatures / Licenses tab, click Import.

   

4. Click Browse to find your file on your system.
5. After selecting it, click Upload, and the system tells you when the file is successfully uploaded.
6. Navigate to Manager View | HOME > Settings > Licenses to confirm that Closed Network licenses were updated.

7. Refer to Manager View | HOME > Settings > Closed Network and select the Device License tab to see the devices managed by this NSM system.

   The devices listed in the Device License tab are the same that are listed in MSW for this instance of NSM.