NetExtender Release Notes
Version 10.2.324/10.2.839
May 2022
About NetExtender
NetExtender is a transparent software application for Windows and Linux users that enables remote users to securely connect to a network accessed through a SonicWall appliance. With NetExtender, remote users can securely run any application on the remote network. Users can upload and download files, mount network drives, and access resources as if they were on the local network. The NetExtender connection uses a Point-to-Point Protocol (PPP) connection.
This release supports all the features and contains all the resolved issues found in previous NetExtender releases. For more information, see the previous release notes, available on MySonicWall at: https://mysonicwall.com.
Compatibility and Installation Notes
- Most popular browsers are supported, but Google Chrome is preferred for the real-time graphics display on the Dashboard.
- A MySonicWall account is required.
Supported Platforms
NetExtender Client Versions
The following is a list of NetExtender client versions in this release.
Version | Description |
---|---|
10.2.324 | NetExtender for Windows 11 |
10.2.324 | NetExtender for Windows 10 |
10.2.839 | NetExtender for 32-Bit Linux TGZ |
10.2.839 | NetExtender for 64-Bit Linux TGZ |
10.2.839 | NetExtender for 32-Bit Linux RPM |
10.2.839 | NetExtender for 64-Bit Linux RPM |
Supported Client Platforms
NetExtender 10.2.324 is supported on computers running the following Windows version:
-
Windows 11.
-
Windows 10.
NetExtender 10.2.839 is supported on computers running the following Linux versions:
-
Ubuntu 20.x and higher
-
Red Hat Enterprise Linux 8.x and higher
-
CentOS 8.x and higher
Always on VPN and SND are available with NetExtender for Windows, but not with NetExtender for Linux.
Supported SonicWall Appliances
SonicWall appliances receive NetExtender connections from remote clients. The following appliances are supported:
-
SonicWall firewalls running SonicOS or SonicOS 7.0.0 and higher, including the following platforms:
-
TZ270, TZ270W, TZ370,TZ370W, TZ470, TZ470W running SonicOS 7
-
TZ570, TZ570W, TZZ570P, TZ670 running SonicOS 7
-
NSa 2700, NSa 3700 running SonicOS 7
-
NSv 270, NSv 470, and NSv 870 running SonicOS or SonicOS 7
-
NSsp 15700 running SonicOS 7
-
-
SonicWall firewalls running SonicOS 6.5.4.7 and higher, including the NSa, TZ, SOHO, and SuperMassive series platforms:
-
TZ300, TZ300W, TZ300P, TZ350, TZ350W, TZ400, TZ400W, TZ500, TZ500W, TZ600, TZ600P
-
NSa 2600, 3600, 4600, 5600, 6600
-
NSa 2650, 3650, 4650, 5650, 6650, 9250, 9450, 9650
-
SOHO W, SOHO 250, SOHO 250W
-
SuperMassive 9200, 9400, 9600
-
-
SonicWall virtual firewalls running all releases of SonicOS 6.5.4.4v, including the following NSv series platforms:
-
NSv 10, 25, 50, 100, 200, 300, 400, 800, 1600
-
-
Secure Mobile Access (SMA) 100 Series appliances running SMA 10.2.1 or higher:
-
SMA 200, SMA 210, SMA 400, SMA 410
-
SMA 500v for ESXi (on ESXi 5.0 and higher)
-
SMA 500v for Hyper-V (on Hyper-V 2016 and 2019)
-
SMA 500v for AWS
-
SMA 500v for Azure
-
SMA 500v for KVM
-
Supported Firewall Firmware Version
-
GEN 6/6.5 – 6.4.5.9-92n
-
GEN 7 – 7.0.1-5030
Supported Firmware SMA Version
-
SMA 100 10.2.1.4-31sv
SonicWall recommends to use the latest NetExtender version with the latest version of SMA 100 Series firmware for optimal performance.
Resolved Issues
Issue ID | Issue Description |
---|---|
SMA-3610 | NetExtender indicates an OpenSSL CVE-2022-0778 DoS vulnerability. |
Known Issues
Issue ID | Issue Description |
---|---|
SMA-3415 | NetExtender fails to reconnect when Network adapter is switched in Linux. |
SMA-3681 | NetExtender reconnection takes longer with the Linux 10.2.839 build. |
GEN6-3435 | NetExtender takes longer to disconnect when client settings are changed from the Split Tunnel to the Tunnel All mode. |
Additional References
SMA-3428
Was This Article Helpful?
Help us to improve our support portal