Regular MSSP Feature Guide

Provisioning Cloud Secure Edge

This section explains the steps to provision the Cloud Secure Edge (CES) on Monthly Billing.

To provision a product

  1. Navigate to Monthly Billing | Monthly Products.
  2. Click Provision > Product.
  3. Select the Tenant Name under which you want to add the Product.
  4. Enter the Friendly Name of the Product.
  5. Enter a unique Cloud Secure Edge Name to identify on the CES portal.

    Follow the below criteria to define the name:

    • Name should start with a letter.
    • Only lowercase letters a-z, numbers 0-9, and hyphen (-) are allowed.
    • The length of the name should be between 4 and 50 characters.
  6. Select Secure Private Access and Secure Internet Access levels.

    • You must select at least one of the services between Private and Internet access. If you do not want to provision for Private access, you can choose No Change and for Internet access, you must select the access between Basic and Advanced.

    • Secure Internet Access is available only after you select the option for Secure Private Access.

    • For more information about the bundles, refer to the Cloud Secure Edge data sheet or contact sales@sonicwall.com.

    • Select Secure Private Access to access the resources on the intranet (within the network).

      Secure Private Access Basic

      With this bundle, ZTNA and VPNaaS are delivered through Global Edge.

      Secure Private Access Advanced

      Select this bundle if you have EDR/MDM/SIEM integrations or Passwordless/Clientless access requirements.

      No Change Select this option if you do not want to make a provision.
    • Select Secure Internet Access to access the resources on the internet (outside of the network).

      Secure Internet Access Basic

      The bundle comes with DNS filtering that protects the device anywhere.

      Secure Internet Access Advanced

      Select this bundle if you have Cloud Access Security Broker, Advanced Secure Web Gateway, and integration requirements.

      No Change Select this option if you do not want to make a provision.
  7. Set the number of units to be provisioned for the Private and Internet access.

    Select Set upper limit to enter the maximum allowable units or select No upper limit to set the maximum allowable units to 99998.

  8. Set the Expiry Date of the Product for Private and Internet access.

    Selecting Never as the Expiry Date sets the validity for 5 years, but the license is renewed automatically on the expiry date.

  9. Select the applicable Data Center.
  10. Click Provision.
  11. Check the STATUS of the added Product in the Monthly Products table.

    Active The Product has been successfully provisioned and is ready to use.
    Provisioning in progress The Product provisioning is in progress. Wait until the status is changed to Active to use the Product.
    Expired The Product is expired and not available for use.

    You can find the CSC Console icon for the Active Products except for NSv Products.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden