• Wireless Network Manager 4.4.0
• About Wireless Network Manager
• Features
• Prerequisites
  • System Requirements
  • Browser Requirements
  • MySonicWall Account
    • Creating a MySonicWall Account
  • Supported Devices
• Wi-Fi Quick Start - Checklist - WNM User Guide
• WNM Object Organization
  • Network Components
    • Switch Policy Components
  • AP Policy Components
• Using Wireless Network Manager
  • Using the Wireless Network Manager Interface
  • Creating a Wireless Network Hierarchy
  • Adding a Location to the Network Hierarchy
  • Adding a Zone to a Location
• Managing Devices
  • Managing Access Points
    • Registering Access Points with MySonicWall.com
    • Registering Access Points with SonicExpress
    • Adding Access Points to a Zone
  • Managing Switches
    • Registering Switches
    • Adding Switches to a Zone
• Subscription Services
• Licensing Devices
• Attaching Policies
• SonicWall Support
  • About This Document

Adding Switches to a Zone

When first logging onto Wireless Network Manager, you might have to wait a few moments for the device inventory to synchronize with Wireless Network Manager. Then you can add a new switch device to any of the zones in your hierarchy. All of the devices under the same zone have the same configuration.

To add a switch to a zone

1. Navigate to Network > Zones.

   

   The page shows the current hierarchy, with the policies and device count in each zone in the bottom panel.

   Hover over the zone row to display the available options on the far right.

2. Click Edit/Config next to the zone you wish to edit or add a device. The Edit Zone screen displays.

   

3. In the Zone Devices section, click Plus (+) on the right. The Edit Zone/Add Devices to Zone page displays.

   

4. Fill in the information about your device.
5. Click Add.

The device is added to the zone and to the Zone Devices list.