• SonicWave 600 series
• Deployment Scenarios Overview
  • SonicWave 600 Series Deployment Considerations
  • SonicWave 600 Series Deployment Scenarios
• Wireless Access Point Placement Considerations
  • Radio Frequency Barriers
  • RF Interference
• Software Configuration
  • Configuring SonicOS for Wireless Access
    • Firewall-based Configuration
    • Cloud-based Configuration
  • Wireless Cloud Management Overview
    • WiFi Cloud Manager
    • WiFi Planner
    • WiFi Cloud Manager Mobile application
  • Integration with other SonicWall Software
• Managing the SonicWave with a Firewall
  • Configuring the SonicWave Provisioning Profile
  • Configuring the Network Interface
  • Configuring the WLAN Zone
• Deploying a SonicWave with Wireless Network Manager
  • Licensing Requirements
  • Registering and Deploying the SonicWave
    • Registering the SonicWave
    • Accessing the Wireless Network Manager
    • Deploying with the Wireless Network Manager
    • Creating a Zone Policy
    • Linking the Policy to the Zone
• Using SonicPoint FairNet Bandwidth Limit Policies
  • SonicPoint FairNet Features
  • Configuring SonicPoint FairNet
• SonicWall Support
  • About This Document

WiFi Cloud Manager

WiFi Cloud Manager is an intuitive Wi-Fi network management system that simplifies Wi-Fi access, control, and troubleshooting. The Secure Wireless Cloud Management System can be deployed across multiple regions and is accessible from anywhere with an Internet connection.

You can access the WiFi Cloud Manager by clicking the Wireless tile from the Capture Security Center. The first time you access the WiFi Cloud Manager, you are asked to configure a wireless network hierarchy on the Zones & Policies > Locations page. Create your network hierarchy by adding Locations, Child Locations, and Zones under your Tenant. Additional tenants can be created from your MySonicWall ( MSW) account.

After configuring the network hierarchy, you can use the wireless mobile application to add access points. Login to the application with your MSW credentials and select Register APs to open the QR code scanner. After scanning the QR code, the devices are registered and listed on MSW. You can change access point configurations from the Devices page.