• SonicWave 600 series
• Deployment Scenarios Overview
  • SonicWave 600 Series Deployment Considerations
  • SonicWave 600 Series Deployment Scenarios
• Wireless Access Point Placement Considerations
  • Radio Frequency Barriers
  • RF Interference
• Software Configuration
  • Configuring SonicOS for Wireless Access
    • Firewall-based Configuration
    • Cloud-based Configuration
  • Wireless Cloud Management Overview
    • WiFi Cloud Manager
    • WiFi Planner
    • WiFi Cloud Manager Mobile application
  • Integration with other SonicWall Software
• Managing the SonicWave with a Firewall
  • Configuring the SonicWave Provisioning Profile
  • Configuring the Network Interface
  • Configuring the WLAN Zone
• Deploying a SonicWave with Wireless Network Manager
  • Licensing Requirements
  • Registering and Deploying the SonicWave
    • Registering the SonicWave
    • Accessing the Wireless Network Manager
    • Deploying with the Wireless Network Manager
    • Creating a Zone Policy
    • Linking the Policy to the Zone
• Using SonicPoint FairNet Bandwidth Limit Policies
  • SonicPoint FairNet Features
  • Configuring SonicPoint FairNet
• SonicWall Support
  • About This Document

Deploying a SonicWave with Wireless Network Manager

This section describes registering and deploying a 600 Series SonicWave using SonicWall's Wireless Network Manager. You can leverage both Single-Pane-of-Glass (SPOG) visualization and the ZeroTouch deployment capabilities provided in the SonicWall portal.

Traditionally, a SonicWall firewall is required to act as the controller for the SonicPoint/SonicWave when deploying a wireless device. With the introduction of Wireless Network Manager, you can deploy SonicWall's wireless devices without a firewall. SonicWaves now include Capture ATP and a Content Filtering Service (CFS) to address all security concerns at the wireless LAN network level.