• SonicOS/X NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Node Counts Per Platform
  • Installation File / Supported Platforms
  • Hardware Compatibility
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • High Availability Configurations
  • Exporting and Importing Firewall Configurations
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS/X on the NSv Series
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Obtaining the NSv Image
  • To Install NSv on Hyper-V
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • Incompatible CPU
    • Incorrect CPU Configuration
    • Insufficient Resources at Time of Configuration
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS/X
• SonicOS/X Management
  • Managing SonicOS/X on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the CLI and Management Console
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Downloading Logs in SafeMode
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Configuring Interface Settings

In SafeMode, the Management Network screen includes editable and actionable items that are read-only when the management console is in normal mode.

To edit an interface

1. In the SafeMode Management Network screen, select the Management interface option and then press Enter.

   The Select Interface list appears, displaying all of the interfaces available on the NSv.

   

2. Select the interface you wish to edit and press Enter.

   The IPv4 and IPv6 addresses, Netmask, MAC address, Gateway, and DNS settings are displayed on the screen above the interface selection dialog.

3. To edit the IPv4 address, select IPv4 Address on the screen and press Enter.

   The on-screen dialog displays the current IP address.

4. Navigate into the dialog and make the desired changes, then press Enter to close the dialog or press Esc to cancel and close the dialog.

5. Two new buttons appear on the screen after you make changes to an interface setting: Save changes or Cancel. You can use the Tab key to navigate to these buttons.

   

   You cannot navigate to the left navigation pane until you either save changes or cancel using these buttons.

Do one of the following:

• To make changes to other settings for this interface, navigate to the desired setting, press Enter, make the changes in the dialog, then press Enter to close the dialog for that setting. Repeat for other settings, as needed.

• If finished making changes to the settings for this interface, press Tab to navigate to the Save changes button and then press Enter to save your changes.

• Press Tab to navigate to the Cancel button and then press Enter to cancel all changes to the settings for this interface.