• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Node Counts Per Platform
  • Installation File / Supported Platforms
  • Hardware Compatibility
  • KVM/QEMU
  • Hardware-Assisted Full Virtualization
  • Paravirtualization
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Importing Firewall Configurations
  • High Availability Configurations
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Preparing the Linux Server System
  • Obtaining the NSv Image
  • Installing the NSv Series on Ubuntu-KVM/QEMU
    • Adding VLAN Parameters to the Network Card
    • Locating the image file
    • Using the CLI to Configure User Settings
    • Next Steps and Related Topics
  • Installing the NSv Series on CentOS-KVM/QEMU
    • Creating NSv with Virt-install
    • Editing a Virtual Machine Configuration File
    • Adding VLAN Parameters to the Network Card
    • Next Steps and Related Topics
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the Management Console with SSH
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Adding VLAN Parameters to the Network Card

• Web Management Interface

  For best results, X0: 518 and X1: 201 are recommended.

  Access settings through Virtual Machine Manager | Connection Details > Network Interface

• Command Line Interface

  apt-get install vlan bridge-utils

  edit /etc/network/interfaces:

  #edit physical interface

  auto eno 1

  Where eno 1 is the network server on the Ubuntu interface.

  iface eno 1 inet manual

  #add sub-interface, the number is vlan to be added

  auto eno 1.301

  iface eno 1.301. inet manual

  vlan-raw-device eno 1

  #add bridge

  auto brvlan301

  iface brvlan301 inet static

  bridge_stp off

  bridge_waitport 0

  bridge_fd 0

  bridge_ports eno 1_301

  address 10.103.4.19

  netmask 255.255.255.0

  gatewar 10.103.64.1

  dns_nameserver 10.196.2020.200

  systemctl restart network