SonicOS 8 Access Points
- SonicOS8
- About Access Points
- Settings
- Synchronize Access Points
- Provisioning Overview
- Creating/Modifying Provisioning Profiles
- Adding/Editing a Provisioning Profile - Getting Started
- General Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
- Sensor Settings for WIDP in Provisioning Profiles
- Mesh Network Settings for Provisioning Profiles
- 3G/4G/LTE WWAN Settings for Provisioning Profiles
- Bluetooth LE Settings for Provisioning Profiles
- Deleting Access Point Profiles
- Product Specific Configuration Notes
- Managing Access Point Objects
- Firmware Management
- Floor Plan View
- Station Status
- Intrusion Detection Services
- Advanced IDP
- Packet Capture
- Virtual Access Points
- RF Monitoring
- RF Analysis
- RF Spectrum
- FairNet
- Wi-Fi Multimedia
- 3G/4G/LTE WWAN
- Bluetooth LE Devices
- Radio Management
- SonicWall Support
Management Interface Overview
The components of the FairNet display are described in the following table.
| Name | Description |
|---|---|
| Enable FairNet | Enables the FairNet feature. |
| FairNet Policies | In the FairNet Policies table header: Selects or deselects all the policies in the FairNet Policies table. Individual policies can also be selected from the policies list. |
| Direction |
Displays the direction for each policy. The directions include:
|
| Start IP | Displays the start point for the IP address range. |
| End IP | Displays the end point for the IP address range. |
| Min Rate (kbps) | The minimum bandwidth that clients are guaranteed. Minimum rate is 1 Kbps. |
| Max Rate (kbps) | The maximum bandwidth that clients are guaranteed. Maximum rate is 307200 Kbps. |
| Interface | Displays the interface to which the FairNet policy applies. This is the interface on the managing firewall that the access point is connected to. |
| Enable | Enables the selected FairNet policy when the box is checked. |
| Configure | Edits existing FairNet policies when the Edit icon is clicked. Deletes the specific FairNet policy when the Delete icon is clicked. |
| Add | Adds a FairNet policy for an IP address or range of addresses. Displays the Add Fairnet Policy dialog. |
| Delete | Deletes the selected FairNet policies. |
| Accept | Applies the latest configuration settings. |
| Cancel | Cancels any changed configuration settings. |
Was This Article Helpful?
Help us to improve our support portal