SonicOS 7.0 Users

Configuring RADIUS Users Settings

  1. Navigate to Device >Users > Settings > Accounting.
  2. Next to Configure RADIUS, click Configure.

    The RADIUS Configuration page is displayed.

  3. On the Radius Users tab, do the following:

    1. Select Allow only users listed locally if only the users listed in the SonicOS database are authenticated using RADIUS.

    2. Select the mechanism used for setting user group memberships for RADIUS users from the following choices:

      • Select Use vendor-specific attribute on RADIUS server to apply a configured vendor-specific attribute from the RADIUS server. The attribute must provide the user group to which the user belongs.

      • Select Use RADIUS Filter-Id attribute on RADIUS server to apply a configured Filter-Id attribute from the RADIUS server. The attribute must provide the user group to which the user belongs.

      • Select Use LDAP to retrieve user group information to obtain the user group from the LDAP server. You can click the Configure button to set up LDAP if you have not already configured it or if you need to make a change.

      • If you do not plan to retrieve user group information from RADIUS or LDAP, select Local configuration only.

      • Select the group from the Default user group to which all RADIUS users belong drop-down menu. See Configuring Local Groups.

  4. Click Save.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden