Adding an SD-WAN SLA Class Object

To add a SLA Class Object

1. Navigate to Network | SDWAN > SLA Class Objects.
2. Click the Add icon.

   The Add SLA Class Object dialog appears.

   

3. Enter a meaningful name in the Name field.

4. Enable Include Latency to include the SLA class latency attribute for this object to exclude the latency attribute. This option is selected by default.

5. If Include Latency is enabled, enter the acceptable latency, in milliseconds, in the Latency (ms) field. The minimum is 0 milliseconds, the maximum is 1000 milliseconds, and the default is 0 milliseconds.

6. Enable Include Jitter to include the SLA class jitter attribute for this object to exclude the jitter attribute. This option is selected by default.

7. If Include Jitter is enabled, enter the acceptable jitter, in milliseconds, in the Jitter (ms) field. The minimum is 0 milliseconds, the maximum is 1000 milliseconds, and the default is 0 milliseconds.

8. Enable Include Loss to include the SLA class packet loss attribute for this object to exclude the packet loss attribute. This option is selected by default.

9. If Include Loss is enabled, enter the acceptable percentage of packet loss in the Loss (%) field. The minimum is 0, the maximum is 100, and the default is 0.

10. You cannot exclude all three attributes (Latency, Jitter, Packet Loss) in the same object.
11. You can view the SLA Probe section to see what you are getting on each link to determine practical thresholds.
10. Optionally, enter a comment in the Comment field.
11. Click OK.