• SonicOS 7.1 VoIP
• About SonicOS
  • Working with SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
• VoIP
  • VoIP Security
    • Security Appliance Requirements for VoIP
  • VoIP Protocols
    • H.323
    • SIP
  • SonicWall’s VoIP Capabilities
    • VoIP Security
    • VoIP Network
    • VoIP Network Interoperability
    • Supported Interfaces
    • Supported VoIP Protocols
      • H.323
      • SIP
      • SonicWall VoIP Vendor Interoperability
      • CODECs
      • VoIP Protocols on which SonicOS Does Not Perform Deep Packet Inspection
    • BWM and QoS
      • Quality of Service
    • How SonicOS Handles VoIP Calls
      • Incoming Calls
      • Local Calls
  • Settings
    • Configuring VoIP Settings
      • General Settings
      • SIP Settings
        • Enabling SIP
      • H.323 Settings
        • Configuring Bandwidth on the WAN Interface
        • Configuring VoIP Access Rules
    • Configuring VoIP Logging
• Call Status
• SonicWall Support
  • About This Document

Configuring VoIP Settings

If Wireless-Controller-Only mode has been selected for Wireless LAN Controller, any attempt to enable SIP or H.323 options displays an error message in the lower right corner of the browser window.

Configure VoIP through NETWORK | VoIP > Settings. This page is divided into three sections:

• General Settings
• SIP Settings
• H.323 Settings