• SonicOS 7.1 Rules and Policies
• Overview
  • About SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
• Access Rules
  • Setting Firewall Access Rules
    • About Connection Limiting
    • Using Bandwidth Management with Access Rules
      • Enabling Bandwidth Management on an Access Rule
    • Creating Access Rules
    • Configuring Access Rules for IPv6
      • About Stateful Packet Inspection Default Access Rules
    • Enabling and Disabling Access Rules
    • Editing Access Rules
    • Deleting Access Rules
    • Restoring Access Rules to Default Settings
    • Displaying Access Rules
      • By Zones
      • By Column
    • Displaying Access Rule Traffic Statistics
    • Configuring Access Rules for NAT64
    • Configuring Access Rules for a Zone
    • Access Rules for DNS Proxy
    • User Priority for Access Rules
  • Access Rule Configuration Examples
    • Enabling Ping
    • Blocking LAN Access for Specific Services
    • Allowing WAN Primary IP Access from the LAN Zone
• NAT Rules
  • About NAT in SonicOS
  • About NAT Load Balancing
    • Determining the NAT LB Method to Use
    • Caveats
    • How Load Balancing Algorithms are Applied
    • Sticky IP Algorithm Examples
      • Example One - Mapping to a Network
      • Example Two - Mapping to an IP Address Range
  • About NAT64
    • Use of Pref64::/n
  • About FQDN-based NAT
  • About Source MAC Address Override
  • Viewing NAT Policy Entries
    • Changing the Display
    • Filtering the Display
    • Displaying Information about Policies
  • Adding or Editing NAT or NAT64 Rule Policies
  • Deleting NAT Policies
  • Creating NAT Rule Policies: Examples
    • Creating a One-to-One NAT Policy for Inbound Traffic
    • Creating a One-to-One NAT Policy for Outbound Traffic
    • Inbound Port Address Translation via One-to-One NAT Policy
    • Inbound Port Address Translation via WAN IP Address
    • Creating a Many-to-One NAT Policy
    • Creating a Many-to-Many NAT Policy
    • Creating a One-to-Many NAT Load Balancing Policy
    • Creating a NAT Load Balancing Policy for Two Web Servers
    • Creating a WAN-to-WAN Access Rule for a NAT64 Policy
    • DNS Doctoring
• Routing
  • About Routing
    • About Metrics and Administrative Distance
      • About Metrics
      • About Administrative Distance
    • Route Advertisement
    • ECMP Routing
    • Policy-based Routing
    • Policy-based TOS Routing
    • PBR Metric-based Priority
    • Policy-based Routing and IPv6
    • OSPF and RIP Advanced Routing Services
      • About Routing Services
        • Protocol Type
        • Maximum Hops
        • Split-Horizon
        • Poison Reverse
        • Routing Table Updates
        • Subnet Sizes Supported
        • Autonomous System Topologies
      • OSPF Terms
    • Drop Tunnel Interface
    • App-based Routing
  • Rules and Policies >
    • Configuring
      • Adding Static Routes
      • Probe-Enabled Policy-based Routing Configuration
• DNS Rules
  • Creating DNS Filtering Profiles
  • Configuring DNS Filtering
    • Creating DNS Policy Rules
      • Editing DNS Policies
      • Deleting DNS Policies
    • Configuring Global DNS Filtering Settings
    • Configuring DNS Filtering Custom Domains
  • Viewing DNS Information
    • Viewing DNS Using the Dashboard
    • Viewing DNS Filtering Reports
• Content Filter Rules
  • About Content Filtering Rules (CFS)
    • About Content Filter Rules
    • About UUIDs for CFS Policies
    • About Content Filter Action Objects
    • How CFS Works
  • Configuring CFS Policies
    • About the Content Filter Rule Table
      • Searching the Content Filter Rule Table
    • Adding a Content Filter Rule
    • Editing a Content Filter Rule
    • Deleting Content Filter Rules
• App Rules
  • About App Rules
    • What are App Rules?
      • About App Rules Policies
      • About App Rules Capabilities
    • Benefits of App Rules
    • How Does Application Control Work?
    • About App Rules Policy Creation
    • Licensing App Rules and App Control
    • Terminology
  • Rules and Policies > App Rules
    • Configuring an App Rules Policy
  • Verifying App Rules Configuration
    • Useful Tools
      • Wireshark
      • Hex Editor
  • App Rules Use Cases
    • Creating a Regular Expression in a Match Object
    • Policy-based Application Rules
    • Logging Application Signature-based Policies
    • Compliance Enforcement
    • Server Protection
    • Hosted Email Environments
    • Email Control
    • Web Browser Control
    • HTTP Post Control
    • Forbidden File Type Control
    • ActiveX Control
    • FTP Control
      • Blocking Outbound Proprietary Files Over FTP
      • Blocking Outbound UTF-8 / UTF-16 Encoded Files
      • Blocking FTP Commands
    • Bandwidth Management
    • Bypass DPI
    • Custom Signature
    • Reverse Shell Exploit Prevention
      • Generating the Network Activity
      • Capturing and Exporting the Payload to a Text File Using Wireshark
      • Creating a Match Object
      • Defining the Policy
• Endpoint Rules
• SonicWall Support
  • About This Document

About Administrative Distance

The admin distance is not used for prioritizing routes within PBR itself, so unless dynamic routing is in use, the admin distance set for a static route has no effect. When dynamic routing is being used, the admin distance provides a mechanism by which static routes defined in PBR can be compared to otherwise equivalent dynamic routes possibly received from protocols such as OSPF, RIP, or BGP. By default, the admin distance of a PBR static route inserted into the network services module (NSM) is equal to the metric defined for the PBR route. The admin distance of each static route may optionally be set to a different value when a custom value is entered for Admin Distance.

For example, if a simple (destination only) static route (for example, destination = 14.1.1.0/24) is defined with a metric of 10 and the admin distance set to its default of Auto, that route is populated into NSM with an admin distance and metric of 10.

Now assume the same 14.1.1.0/24 route is received from both RIP and OSPF. RIP routes have a default admin distance of 120 and OSPF routes 110, so the static route, with a default admin distance (== the metric) of 10 would be preferred over both routes, and NSM would not populate either the OSPF or RIP route into PBR. If the admin distance of the static route had been set to 115 (keeping the metric at 10), however, then the OSPF route (at 110) would be preferred over the static route, but the RIP route would not. If the OSPF route disappeared, NSM would withdraw the OSPF route and would not populate the RIP route as its 120 AD is greater than the static route's 115 AD.

In either of the above cases, the static route is still preferred in PBR because all non-default routes populated into PBR from NSM are added with a 110 metric, which is greater than the metric of 10 for the static route.

If an admin distance of 110 and a metric > 110 are used for the static routes, the metric value passed to NSM would be used by OSPF when it compares the metric of the static route to the OSPF metric (or cost) of any competing OSPF route.