• SonicOS 7.0
• System Monitor
  • Using the Toolbar
  • Common Features
    • Legends
    • Tooltips
    • Changing Chart Format
    • Selecting IPv6/IPv4
    • Current, Minimum, Maximum Display
  • Multicore Monitor
  • Applications Bandwidth
  • Interface Usage
    • Packet Rate Monitor
    • Packet Size
  • Connection Usage
    • Active Connection Count
• Protocol Monitor
  • Enabling the Protocol Monitor
  • Using the Toolbar
  • Using Per-Chart Viewing Options
    • Legends
    • Tooltips
• Policy Monitor
  • Using the Toolbar
  • Common Features
    • Legends
    • Tooltips
    • Changing Chart Format
    • Scaling a Chart
  • Security Policy
  • NAT Policy
  • Route Policy
  • Decryption Policy
  • DoS Policy
• User Monitor
• Bandwidth Monitor
• SonicWall Support
  • About This Document

Current, Minimum, Maximum Display

All charts, except Applications, display the current, minimum, and maximum values for the chart. The values vary by chart and can be in Mbps, Kbps, Pps (packets per second), Bytes, or Cps (connections per second).

For the Ingress/Egress charts, the information is displayed for both halves, the Ingress on the top and the Egress on the bottom. For the other charts, the information is displayed on the top.