SonicOS 7.0 Objects

Download PDF
Technical Documentation > SonicOS 7.0 Objects > Addresses > Addresses Page > Address Objects > Adding Address Objects

Adding Address Objects

An address object must be defined before configuring NAT policies, access rules (Classic Mode) or security policies (Policy Mode, and services.

To add an address object

  1. Navigate to OBJECT | Match Objects > Addresses > Address Objects.

  2. Click the Add icon.

  3. Enter a Name for the network address object.
  4. Select a Zone Assignment for the address object.

  5. Select one of the following Type from the drop-down menu and fill in the associated fields:

    Address Object Type Action with Associated Field Screen Shot
    Host Enter an IP Address.

    Range Enter Starting IP Address and Ending IP Address.

    Network

    1. Enter the network IP address (such as 255.255.255.0) in the Network field.

    2. Enter the Netmask (such as 255.255.255.0) or prefix length (such as 24) in the Netmask/Prefix Length field.

    FQDN

    1. Enter the domain name for the individual site or range of sites (with a wildcard ‘*’) in the FQDN Hostname field.

    2. Enable Manually set DNS entries to enter the time-to-live in seconds in the TTL (120 ~ 86400s) field if required.

      The minimum value is 120 and the maximum value is 86400 seconds.

    MAC

    Enter the MAC address (such as 00:11:f5:1b:e3:cf) in the MAC Address field.

    By the default, Multi homed option is selected.

  6. Click Save.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden