SonicOS 7.0 Objects
- SonicOS 7.0
- Match Objects
- Zones
- How Zones Work
- Default Zones
- Security Types
- Allow Interface Trust
- Effect of Wireless Controller Modes
- Zones Overview
- The Zones Page
- Adding a New Zone
- Adding a New Zone in Policy Mode
- Adding a New Zone in Classic Mode
- Configuring a Zone for Guest Access
- Configuring a Zone for Open Authentication and Social Login
- Configuring the WLAN Zone
- Configuring the RADIUS Server
- Configuring DPI-SSL Granular Control per Zone
- Enabling Automatic Redirection to the User-Policy Page
- Cloning a Zone
- Editing a Zone
- Deleting Custom Zones
- Addresses
- Addresses Page
- About UUIDs for Address Objects and Groups
- Working with Dynamic Address Objects
- Services
- URI Lists
- Schedules
- Dynamic Group
- Email Addresses
- Match Objects
- Countries
- Applications
- Web Categories
- Websites
- Match Patterns
- Custom Match
- Profile Objects
- Endpoint Security
- Bandwidth
- QoS Marking
- Content Filter
- DHCP Option
- Block Page
- Anti-Spyware
- Gateway Anti-Virus
- Log and Alerts
- Intrusion Prevention
- AWS
- Action Profiles
- Security Action Profile
- DoS Action Profile
- Action Objects
- App Rule Actions
- Content Filter Actions
- Object Viewer
- SonicWall Support
BWM
CFS Bandwidth Action Objects are similar to, but not the same as, Bandwidth Profile Objects created on the OBJECT | Profile Objects > Bandwidth page. CFS BWM Action Objects do not appear on the OBJECT | Profile Objects > Bandwidth page and BWM profile objects do not appear on the OBJECT | Action Objects > Content Filter Actions page. But, you can use the BWM Profile Objects created on the OBJECT | Profile Objects > Bandwidth page to configure a CFS BWM Action Object.
For more information about bandwidth management, refer to the Actions Using Bandwidth Management.
To allocate bandwidth resources for content filtering
- Navigate to OBJECT | Action Objects > Content Filter Actions.
- Click the Add icon.
-
Click the BWM tab under OPERATION CONFIGURATIONS group.
-
Select the Bandwidth Aggregation Method to be applied to the BWM object. For more information, refer to Bandwidth Management Methods.
- Per Policy (default)
- Per Action
-
Set the Bandwidth options.
Option Description Enable Egress Bandwidth Management To enable BWM on outbound traffic Enable Ingress Bandwidth Management To enable BWM on inbound traffic Respective Bandwidth Object drop-down menu becomes active when the option is enabled.
-
Select Bandwidth Object from respective drop-down menu.
- An existing BWM object
- Create a new Bandwidth Object. For more information about creating a new bandwidth object, refer to Defining Bandwidth Profile Object Settings.
-
Enable Tracking Bandwidth Usage option to track bandwidth usage.
You can enable the Enable Tracking Bandwidth Usage option only when the Enable Egress Bandwidth Management and/or Enable Ingress Bandwidth Management is selected.
- Click Save.
Was This Article Helpful?
Help us to improve our support portal