• SonicOS 7
• Wireless Overview
  • Device Support
  • Compliance
  • Considerations for Using Wireless Connections
  • Adjusting the Antennas
  • Wireless Node Count Enforcement
  • About MAC Address Filtering
• Status
  • WLAN Settings
  • WLAN Statistics
  • WLAN Activities
  • Station Status
• Settings
  • Access Point
    • Access Point Wireless Settings
      • 802.11n Wireless Settings
      • 802.11a/b/g Wireless Settings
      • 802.11ac Wireless Settings
    • Wireless Virtual Access Point
  • Wireless WDS Station
  • Access Point & WDS Station
• Security
  • About Authentication
  • Configuring the WEP Settings
  • Configuring WPA3/WPA2/WPA PSK Settings
  • Configuring WPA3/WPA2/WPA EAP Settings
• Advanced
  • Beaconing and SSID Controls
  • Green Access Point
  • Advanced Radio Settings
    • Configurable Antenna Diversity
• MAC Filter List
  • Deployment Considerations
  • Configuring MAC Filter List
• IDS - Wireless Intrusion Detection Service
  • Configuring IDS Settings
  • Discovered Access Points
• Virtual Access Point
  • Wireless Virtual AP Configuration Task List
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
      • WEP Encryption Settings
      • WPA-PSK / WPA2-PSK Encryption Settings
      • RADIUS Server Settings
    • ACL Enforcement
  • Virtual Access Point Objects
  • Virtual Access Point Groups
  • Enabling the Virtual Access Point Group
• SonicWall Support
  • About This Document

Access Point

Selecting Access Point for the Radio Role configures the SonicWall wireless security appliance as an Internet/network gateway for wireless clients as shown in the following figure:

• Access Point Wireless Settings
• Wireless Virtual Access Point