• SonicOS 7.0
• About DPI-SSL
  • Using DPI-SSL
    • Supported Features
      • Support for Local CRL
      • TLS Certificate Status Request Extension
      • Support for Ciphers
      • DPI-SSL and CFS HTTPS Content Filtering Work Independently
      • Original Port Numbers Retained in Decrypted Packets
    • Security Services
  • Deployment Scenarios
  • Proxy Deployment
  • Customizing DPI-SSL
  • Connections per Appliance Model
• DPI-SSL/TLS Client
  • Deploying the DPI-SSL/TLS Client
    • Configuring General DPI-SSL/TLS Client Settings
      • Enabling DPI-SSL Client on a Zone
    • Selecting the Re-Signing Certificate Authority
      • Adding Trust to the Browser
    • Configuring Exclusions and Inclusions
      • Configuring Exclusions and Inclusions by Objects and Groups
      • Configuring Exclusions and Inclusions by Common Name
        • Viewing Status of DPI-SSL Default Exclusions
        • Rejecting or Accepting Default Common Names
        • Adding Custom Common Names
        • Editing Custom Common Names
        • Deleting Custom Common Names
        • Showing Connection Failures
        • Updating Default Exclusions Manually
      • Configuring Exclusions and Inclusions by CFS Category
  • Applying DPI-SSL/TLS Client
    • Performing Content Filtering using DPI-SSL
    • Filtering Content by App Rules using DPI-SSL
      • Enabling App Control Service on a Zone
  • Viewing DPI-SSL Status
• DPI-SSL/TLS Server
  • Deploying the DPI-SSL/TLS Server
    • Configuring General DPI-SSL/TLS Server Settings
      • Enabling DPI-SSL Server on a Zone
    • Configuring Exclusions and Inclusions
    • Configuring Server-to-Certificate Pairings
• SonicWall Support
  • About This Document

Configuring General DPI-SSL/TLS Server Settings

From the General Settings, you can set the services to be included with which to perform inspection.

Make sure that DPI-SSL Server is enabled on a zone or zones according to Enabling DPI-SSL Server on a Zone to apply the DPI-SSL General settings.

To enable Server DPI-SSL inspection

1. Navigate to the POLICY | DPI-SSL > Server SSL.

   

2. Scroll to the General Settings section.
3. Select Enable SSL Server Inspection.

4. Select one or more of the services with which to perform inspection:

   • Intrusion Prevention
   • Gateway Anti-Virus
   • Gateway Anti-Spyware
   • Application Firewall
5. Click Accept.
6. Scroll down to the SSL Servers section and configure the server or servers to which DPI-SSL inspection is applied. For more information, refer to Configuring Server-to-Certificate Pairings.