• Secure Mobile Access 100 10.2 for the
• Introduction
• Before You Begin
  • Supported Platforms
  • KVM/QEMU
  • Hardware-Assisted Full Virtualization
  • Paravirtualization
  • Creating a MySonicWall Account
• Installing the SMA 100 for KVM Virtual Appliance
  • Preparing the Linux Server System
  • Obtaining the SMA 100 for KVM Image
  • Downloading the SMA 100 for KVM Virtual Appliance Software
  • Installing SMA 100 for KVM on Proxmox (PVE)
  • Installing SMA 100 for KVM on a Linux System using the Virtual Machine Manager
• Configuring the SMA 100 for KVM Virtual Appliance
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
• Licensing and Registering Your Appliance
  • Registering the SMA 100 for KVM
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Configuring the SMA 100 for KVM Virtual Appliance

This section describes how to power on and configure basic settings on the SMA 100 for KVM Virtual Appliance, including virtual hardware settings and networking settings.

• Connecting to the Command Line Interface
• Using the Command Line Interface