• Secure Mobile Access 10.2 for the 500v
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for Azure Virtual Appliance
  • Installing SMA 500v for Azure
• Configuring the SMA 500v for Azure Virtual Appliance
  • Viewing the SMA 500v for Azure Settings
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Show Network Information
    • Reboot
    • Restart SMA 500v for Azure Services
    • Logout
    • Save TSR to Flash
    • Display EULA
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for Azure
  • De-registering an SMA 500v for Azure
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• SonicWall Support
  • About This Document

Obtaining the Latest Image Version

To obtain a new SMA 500v for Azure image file for your security appliance

1. Go to www.MySonicWall.com and connect to your MySonicWall account.

   If you have already registered your SMA 500v for Azure and you chose to be notified when new firmware updates are available on the System > Settings page, you are automatically notified of any updates available for your model.

2. Copy the new SMA 500v for Azure image file to a directory on your management station. For the Virtual Appliance, this is a file such as:

   sw_500vazure_eng_10.x.x.x_10.x.x_p_xxsv_xxxxxxx.sig