• Secure Mobile Access 10.2 for the 500v
• Introduction
• Before You Begin
  • Supported Platforms
  • Creating a MySonicWall Account
• Installing the SMA 500v for Azure Virtual Appliance
  • Installing SMA 500v for Azure
• Configuring the SMA 500v for Azure Virtual Appliance
  • Viewing the SMA 500v for Azure Settings
  • Powering the Virtual Appliance On or Off
  • Connecting to the Web Interface
  • Connecting to the Command Line Interface
  • Using the Command Line Interface
    • Show Network Information
    • Reboot
    • Restart SMA 500v for Azure Services
    • Logout
    • Save TSR to Flash
    • Display EULA
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for Azure
  • De-registering an SMA 500v for Azure
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• SonicWall Support
  • About This Document

Powering the Virtual Appliance On or Off

The SMA 500v for Azure virtual appliance automatically starts after you click Create at the end of the installation process.

To stop, restart, or start the SMA 500v for Azure

1. Display the Overview page as described in Viewing the Settings.

2. At the top of the right pane, click any of the controls for the virtual appliance:

   • Start – Starts the virtual appliance.
   • Restart – Restarts the virtual appliance.
   • Stop – Stops the virtual appliance.

Other controls are available here, including Connect, Capture, Move, Delete, and Refresh.