SonicWave 681 Online Safety and Regulatory Guide

Technical Documentation > SonicWave 681 Online Safety and Regulatory Guide > SonicWall® SonicWave 681 Safety and Regulatory Guide > Mounting the SonicWave 681 > Mounting Using Screws

Mounting Using Screws

To mount the SonicWave 681 using screws

  1. Measure the distance between the two screw attachment points on the underside of the SonicWave ceiling bracket.

  2. On the mounting surface, mark the locations for the two screw insertion points.

  3. Drill pilot holes at the marked locations. For a wood surface, use a drill bit that is appropriate for the screws. For drywall, use a drill bit that is appropriate for the anchors.

  4. For drywall, screw in the anchors.

  5. Insert the screws into the wall or anchors, and screw them in deep enough to leave minimal space between the screw heads and the wall surface.

  6. Supporting the SonicWave in your hands, securely fit the underside slots of the SonicWave onto the screw heads.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden