• Introduction
• Prerequisites
• Benefits
• Use-case Scenarios of MSSP Monthly Services
• Registering Hardware
  • Registering Hardware through MSW
  • Registering Hardware through User Interface
• Provisioning Licenses for TZ and NSa
  • Provisioning Licenses from Tenant Products
  • Provisioning Licenses from MSSP Tenants
• Validating Licenses through User Interface
• SonicWall Support
  • About This Document

Registering Hardware through User Interface

To register a newly purchased TZ or NSa hardware through user interface (UI)

1. Continue from the Setup Guide or point your browser to the appliance LAN IP address (default https://192.168.168.168) and log in using the administrator credentials.

2. Click Register in the top banner or on the MONITOR | Current Status | System Status page under Security Services.

   

   Registering the appliance from TZ or NSa UI requires that DNS Server settings are configured on the WAN (X1) interface.

3. Log in using your MySonicWall account name and password. If you do not have a MySonicWall account, go to https://www.mysonicwall.com to create an account.

4. MySonicWall directly obtains the necessary information from the appliance. When finished, a message that the registration has been completed appears. Click CONTINUE.