• Introduction
• Prerequisites
• Benefits
• Use-case Scenarios of MSSP Monthly Services
• Registering Hardware
  • Registering Hardware through MSW
  • Registering Hardware through User Interface
• Provisioning Licenses for TZ and NSa
  • Provisioning Licenses from Tenant Products
  • Provisioning Licenses from MSSP Tenants
• Validating Licenses through User Interface
• SonicWall Support
  • About This Document

Registering Hardware through MSW

To register a newly purchased TZ and NSa hardware through MSW

1. Login to MySonicWall.

2. Provision the Tenant if not provisioned.

   For more information about provisioning tenant, refer to Master or Regular MSSP Feature Guide available on SonicWall Technical Documentation portal.

3. Navigate to MyWorkspace > Register Products.
4. Select the Tenant to which you want to register the hardware.
5. Enter a Serial number or Activation key or Assign token of the purchased TZ and NSa hardware.

6. Enter Authentication code if prompted.

   For more information about identification of Serial number and Authentication Code on the hardware, click the Help icon next to the Authentication Code field.

7. Navigate to MSSP Monthly > MSSP Tenants and make sure that the tenant information is complete to which the new hardware is registered.

   If the tenant information is incomplete, it looks similar to the below screen shot. Update the tenant information to continue with provisioning through MSSP Monthly services.