• Introduction
• Prerequisites
• Configuring the Switch from CSC-MA
• Device Manager
• Navigation
• Switch Controller Functions
  • Switch
  • Overview
  • Physical View
  • VLAN View
  • Networks
  • Users
  • StaticRoutes
  • QOS
  • 802.1X
  • ARP
  • Voice VLAN
  • RADIUS Server

Configuring the Switch from CSC-MA

To add SonicWall Switch to CSC-MA

1. Navigate to Capture Security Center.

2. Log in to CSC-MA using your MSW credentials.

   

3. Select the Manage tile.
4. Navigate to MANAGE | SETUP > Network > Interfaces.

5. Click the Edit icon next to the interface that you want to update with the switch information.

   

6. Enter the Address and Subnet Mask.
7. Click on the Advanced tab.
8. Select the option Enable Auto-Discovery of SonicWall Switches so the switch is green. This automatically adds the DHCP scope under the configured interface.
9. Click OK to save the settings.