Switch

The Switch command shows the details of available switches in the SWITCH CONFIGURATION table. You can add or delete a switch configuration using the options. To modify a switch, click the configure icon at the end of the table. You can add, edit or delete a switch and use the search function to find a specific switch.

Adding a Switch

To add a switch

1. Navigate to MANAGE | SETUP > Switch Controller > Switch.

2. Click Add Switch.

   

3. Enter the data needed in the open fields.

4. Click the Advanced tab.

   

5. Set the STP Mode and STP State from the drop-down lists.
6. Input the Jumbo Frame Size. The value can range from 1522 to 10240.
7. Click Update.

Deleting a Switch

To delete a switch

1. Navigate to MANAGE | SETUP > Switch Controller > Switch.
2. Select the switch or switches you want to remove.
3. Click Delete Switch.

Editing a Switch

To edit a switch

1. Navigate to MANAGE | SETUP > Switch Controller > Switch.

2. Click the Edit icon for the switch you want to edit.

   

3. Update the fields you want on both the General and Advanced tabs.
4. Click Update.