• Introduction
• Prerequisites
• Configuring the Switch from CSC-MA
• Device Manager
• Navigation
• Switch Controller Functions
  • Switch
  • Overview
  • Physical View
  • VLAN View
  • Networks
  • Users
  • StaticRoutes
  • QOS
  • 802.1X
  • ARP
  • Voice VLAN
  • RADIUS Server

RADIUS Server

Radius Server table displays the details of RADIUS servers configured with the switch. The table shows:

• Server ID
• Server IP address
• Authorized port
• Timeout reply time
• Retry
• Action

To add or edit a RADIUS server

1. Navigate to MANAGE | SETUP > Switch Controller > Radius Server.
2. From the tabs across the top, select the switch you want to delete the static address from.

3. Click Add Radius Server to add a server or click the Edit icon to edit one. The ADD/EDIT RADIUS SERVER dialog is the same for each action.

   

4. Input or update the values in the fields provided. Note that some fields provide a range for their values.

5. Click OK.

To delete a RADIUS server

1. Navigate to MANAGE | SETUP > Switch Controller > Radius Server.

2. From the tabs across the top, select the switch you want to delete the static address from.

3. Check the box for the MAC address you want to delete.
4. Click Delete Radius Server .