• Capture Security Appliance
• Introduction
• Technical Overview
• Deployment Examples
• Prerequisites for CSa Deployment
• High-Level Task List
• Hardware Overview
• Connect and Power On
• Change the Administrator Password
• Initial Setup Using Web Management
• Register and License
• Upgrade the Firmware
• Configure Allowed Devices
• Related Documents for Additional Configuration
• Creating a MySonicWall Account
• SonicWall Support
  • About This Document

Prerequisites for CSa Deployment

The following SonicWall appliances and versions are supported in a Capture Security Appliance deployment:

• Capture Security Appliance running 1.2.0 or newer
• Firewalls running SonicOS/X 7.0.0 or newer
• Firewalls running SonicOS 6.5.4.6 or newer
• Email Security running 10.0.6 or newer

Additional prerequisites include:

• MySonicWall account
• Intelligence Updates license for the CSa
• REST API license for the CSa, if using REST API from an API Connector
• Capture ATP license on firewalls and Email Security