• On-Premises Analytics 2.5.5 for ESXi
• About this Guide
  • Guide Conventions
• System Requirements
  • Supported Firewalls
  • Additional Firewall Requirements
  • Supported Platforms
  • Hardware Compatibility
  • Minimum Requirements
  • IPFIX Based Licensing Model
  • IPFIX Based Capacity Planning
  • Backup and Recovery Information
  • Importing Firewall Configurations
  • Creating a MySonicWall Account
• Installing On-Premises Analytics on ESXi
  • Obtaining the Installation Image
  • Installing On-Premises Analytics on ESXi
  • Configuring On-Premises Analytics on ESXi
  • Adding Firewalls to On-Premises Analytics
• Licensing and Registering Your On-Premises Analytics Instance
  • Registering the On-Premises Analytics Instance
  • Activating Firewall Licensing for Syslog-Based On-Premises Analytics
  • Deregistering Your On-Premises Analytics Instance
• Upgrading On-Premises Analytics
  • Upgrading Analytics 2.5.5
    • Upgrading Analytics with data in external disk
    • Upgrading Analytics with data in internal disk
      • [[[Missing Linked File System.LinkedTitle]]]
    • Unmounting the Hard Disk from older Analytics Version
    • Mounting the Hard Disk on new Analytics
  • Upgrading Analytics using SWI file
• Migrating Data From Internal to External Disk
  • Preparing the Analytics to Add External Disk
  • Adding External Disk
  • Migrating the Data To External Disk
• Using the Management Console
  • Connecting to the Console
  • Management Console Operations
    • System Info
    • Storage
    • Network Interfaces
    • Diagnostics
    • NTP Server
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the Management Console
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Network Interfaces in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Installing a Software Upgrade in SafeMode
    • Downloading Logs in SafeMode
• SonicWall Support
  • About This Document

Enabling SafeMode

SafeMode can be enabled from the management console.

To enable SafeMode

1. Access the On-Premises Analytics Management Console. Refer to Connecting to the Console.

2. In the console, select the Reboot | Shutdown option and then press Enter.

3. Navigate down to the Boot Analytics into safemode option to highlight Enable, and then press Enter.

   

4. Select Yes in the confirmation dialog.

5. Press Enter.

   The On-Premises Analytics instance immediately reboots and comes back up in SafeMode.

   In SafeMode, the web interface is served from an HTTP server. The HTTPS server is not started in SafeMode.