How to enable Gateway Anti-Virus, Anti-Spyware and Intrusion Prevention mechanisms on the firewall?
08/15/2023 1,313 People found this article helpful 488,111 Views
Description
Enabling the security services on the firewall is an essential part of the firewall configuration.
The main Security Services are:
- Gateway Anti-Virus: integrates a high performance Real-Time Virus Scanning Engine and dynamically updated signature database to deliver continuous protection from malicious virus threats at the gateway.
- Intrusion Prevention: integrates a high-performance Deep Packet Inspection architecture and dynamically updated signature database to deliver complete network protection from application exploits, worms and malicious traffic.
- Anti-Spyware
Resolution
Resolution for SonicOS 7.X
This release includes significant user interface changes and many new features that are different from the SonicOS 6.5 and earlier firmware. The below resolution is for customers using SonicOS 7.X firmware.
Once you have purchased the License for the Security Services and activated it in your mySonicWall.com, you will see the licenses showing up on the SonicWall under System | Status/Licenses page.
Even though the Security Services show licensed on the device you would still have to enable the Security Services and apply it on the required zones.
Enabling the Security Services in the Security Services tab
- Navigate to Policy| Security Services | Gateway Anti-Virus .
- Under GATEWAY ANTI-VIRUS GLOBAL SETTINGS: enable the option Enable Gateway Anti-Virus.
- By default, the inbound Inspection for HTTP, FTP, IMAP, SMTP, POP3 is enabled. You can enable the outbound inspection as well if required.
- If you want to exclude some IP addresses from being inspected by the Gateway Anti-Virus, you can do the same by clicking on Configure button. You have the option to Exclude based on the Address object/group.
- Navigate to Policy| Security Services | Intrusion Prevention.
- Under IPS GLOBAL SETTINGS, Enable the option 'Enable IPS'.
- You will have three Signature Groups " High Priority Attacks, Medium Priority Attacks and Low Priority Attacks. You can enable the Detection and Prevention as per your requirement but the recommended settings are to leave the prevention disabled and just enable the detection for low priority attacks.
NOTE: Enabling the Prevention of Low-priority attacks will block ICMP as well.
- Navigate to Policy| Security Services | Anti-Spyware.
- Under ANTI-SPYWARE GLOBAL SETTINGS, enable the option Enable Anti-Spyware.
- This completes enabling the Security Services and you will have to apply these in the appropriate zones for the Security Services to take effect.
Applying the Security Services on the required Zones:
- Navigate to Object|Match Objects|Zones. Edit the appropriate zone required by clicking on configure icon and apply the security services by enabling the checkboxes for "Enable Gateway Anti-Virus Service" "Enable IPS" and "Enable Anti-Spyware Service". The below screenshot shows the Security Services being applied on the LAN zone.
- Click on Save.
CAUTION: Similarly you need to apply the same on the WANzone and additional zones if required.
Resolution for SonicOS 6.5
This release includes significant user interface changes and many new features that are different from the SonicOS 6.2 and earlier firmware. The below resolution is for customers using SonicOS 6.5 firmware.
Once you have purchased the License for the Security Services and activated it in your mySonicWall.com, you will see the licenses showing up on the SonicWall under System | Status/Licenses page. Even though the Security Services show licensed on the device you would still have to enable the Security Services and apply it on the required zones.
Enabling the Security Services in the Security Services tab:
This completes enabling the Security Services and you will have to apply these in to appropriate zones for the Security Services to take effect.
Applying the Security Services on the required Zones:
- Navigate to Manage | Network | Zones.
- Edit the appropriate zone required by clicking on icon and apply the security services by enabling the checkboxes for "Enable Gateway Anti-Virus Service" "Enable IPS" and "Enable Anti-Spyware Service". The below screenshot shows the Security Services being applied on the LAN zone.
- Click on OK to save the setting. Similarly, you need to apply the same on the WAN zone and additional zones if required.
Related Articles
Categories
Was This Article Helpful?
YESNO