How to Create Gen 7 Settings File by Using the Online Migration Tool

12/01/2023 1,617 People found this article helpful 471,523 Views

Description

The migration tool allows users to convert settings from an existing Gen 6 or Gen 6.5 firewall, enabling the creation of a new settings file that can be imported onto the target Gen 7 firewall.This tool can also be used to migrate setting from other third-party systems.

TIP: For assistance with the support matrix, please follow this KB article

NOTE: Setting migration from Gen6 NSv to Gen7 NSv is supported using Migration Tool for ESXi and HyperV platforms only.

As an example, the newly released NSa 2700 with 3x10GB SFP ports, has one fewer port than its predecessor NSa 2650 which had 4x2.5GbE SFP ports.

Resolution

NOTE: Support for migrating settings from Gen5 firewalls to new Gen7 firewalls will be available in the near future.

Steps to convert existing settings via the migration tool:

On the source SonicWall firewall, upgrade the firmware to the latest/active GR (General Release).
Export and save settings from your existing Gen6/6.5 firewall on the local machine
Navigate to https://migratetool.global.sonicwall.com/or go to MySonicWall | Tools | Migration Tool.
Select the Product as SonicWall. Browse and upload your settings file.
Choose the Target Product (NSa 2700 in this example) from the Select Target Product list.
Assign interfaces on the target firewall. Map your existing interfaces to the preferred interfaces on NSa 2700. Click Next.
NOTE: It is recommended to use 1 to 1 Mapping under assigned interfaces
Select the target firmware version for the new settings file - In this example: 7.0.1-5095 (Latest Version) Select File to Export as SonicWall (EXP format). Save the file on your local machine.

TIP: Under Advanced section: Drop default access rules from source device and Drop default Nat policy from source device can be selected in order to only migrate custom access rule and Nat policy from source exp file.
Register the Gen 7 firewall, download the new latest firmware version(currently 7.0.1-5095) and upgrade the firmware.
Upload the newly created settings file into your NSa 2700.
TIP: It is recommended to factory default the NSa 2700 before importing the configuration file (not required if the device is out of the box).
Check DNS settings (configure manually if necessary).
Reboot the firewall.
Import the new generated configuration from Generation 6 device to the generation 7 device.
NOTE: We have used 7.0.1-5095 in this migration

NOTE: You may have the following error "Network error" while importing the configuration into the firewall -GEN7
Please, follow this article here to resolve the error : Getting error "Network error" when importing the configuration into the firewall -GEN7

Not Finding Your Answers?

ASK THE COMMUNITY

Was This Article Helpful?

YES NO

How to Create Gen 7 Settings File by Using the Online Migration Tool

Description

Resolution

Related Articles

Categories

Not Finding Your Answers?

Was This Article Helpful?

Article Helpful Form

Article Not Helpful Form

Follow Us

Subscribe to newsletter

Stay In Touch