How to upgrade SonicWall Switch Firmware from Switch UI?

03/16/2022 77 People found this article helpful 469,687 Views

Description

This article explains how to upgrade the SonicWall Switch firmware directly from the Switch UI. This is helpful in scenarios where the switches are managed independently.

Resolution

To know how to upgrade switch firmware in a firewall managed/firewall integrated switch deployment, please check KB: How To Upgrade Switch Firmware Via The Firewall Interface ?

NOTE: The switch has a default IP of 192.168.168.169 on 1.0.0.2-10s Firmware and above and can be accessed using https://192.168.168.169 in the browser. Any switch with the firmware lower than 1.0.0.2-10s will have a default IP of 192.168.0.239 and can be accessed using https://192.168.0.239

To log in to the switch, connect a computer directly to any port of the switch. Make sure the computer is in the same IP subnet as the switch. Access the switch in the browser via https://192.168.168.169.

There are two ways to upgrade the SonicWall switch firmware from Switch UI.

By uploading the firmware file manually
By selecting a firmware from the SonicWall cloud server.

Firmware upgrade by Uploading the firmware file manually.

NOTE: This method requires you to download the switch firmware from your MySonicWall account.

Log in to the switch and navigate to System | Firmware images.
The Switch has 2 partitions and each partition can be on a different firmware. Select the Partition that you want to upgrade.
NOTE: By default active partition is selected.
Select the upgrade method as Upload file from the Upgrade method drop-down list.
Browse and select the Firmware. Click Apply to apply the firmware. This will cause the Switch to load the firmware into the memory and reboot.
Post reboot the switch will run on the new firmware.

Firmware upgrade by selecting a firmware from SonicWall Cloud Server.

NOTE: For this method to work, we need to make sure that the switch has internet connectivity.

Log in to the switch and navigate to Routing | Static Routes and make sure you have a default route.
Navigate to System | Network | DNS and configure DNS servers.
Navigate to System | Firmware images and Select the Partition that you want to upgrade.
Select the upgrade method as SonicWall Cloud Server from the Upgrade method drop-down list
Select the Firmware from the Available Firmwares drop-down list.
NOTE: It might take a minute or two to populate the firmware list. You can click on the refresh option in front of the Available Firmwares section to force the switch to query the cloud server.
Click on Apply to apply the firmware. This will cause the Switch to load/download the firmware into the memory from the cloud server and reboot.
Post reboot the switch will run on the new firmware.