• SonicOSX 7 Profile Objects
• Endpoint Security
• Bandwidth
  • Understanding Bandwidth Profiles
  • Bandwidth Profiles
    • Configuring Bandwidth Object Settings
      • Elemental Bandwidth Object Settings
    • Configuring BWM on an Interface
    • Configuring BWM in a Security Rule Action
    • Editing Bandwidth Profiles
    • Deleting Bandwidth Profiles
• Block Page
  • Customizing Block Page Settings
  • Cloning Block Pages
  • Deleting Block Pages
• Log and Alerts
  • Adding Log and Alerts Profiles
    • About Event Profiles
  • Editing Log and Alert Profiles
  • Deleting Log and Alert Profiles
• Intrusion Prevention
  • Configuring Intrusion Prevention Profiles
  • Deleting Intrusion Prevention Profiles
• QoS Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • Enabling 802.1p
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled Load
      • QoS Mapping
      • Managing QoS Marking
  • Configuring QoS Marking
• DHCP Option
  • Configuring DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
    • Viewing Instance Properties in SonicOSX
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• SonicWall Support
  • About This Document

Intrusion Prevention

The Intrusion Prevention Objects panel allows you to view all SonicWall threat signatures and from the Intrusion Prevention Profiles tab you can configure the handling of those signatures by creating category profiles or groups on a signature by signature basis. Intrusion Prevention Profiles are signatures grouped together based on attributes such as types of attack.

Intrusion Prevention Profile objects are created at OBJECT | Actions > Security Rule. See the documentation for that feature for more information on setting up your Security Rule Actions.

To view the Intrusion Prevention Objects

1. Navigate to OBJECT | Profiles > Intrusion Prevention.

   The Intrusion Prevention Object page appears.

   

2. Click the Viewer to help filter results.

   In the Viewer, you can narrow results based on Category, Risk Level, Protocol, Orientation, and Direction. Results of your filtering appear in the lower portion of the Viewer.