SonicOS 7.1 Switch Network
- SonicOS 7.1
- About SonicOS
- About Switch Network
- Managing from a Firewall
- Adding a Switch to a Firewall with Zero-Touch
- Adding a Switch to a Firewall Manually
- Changing the Switch Configuration
- Upgrading Firmware
- Shutting Down the Switch
- Restarting the Switch
- Setting Up PoE
- Adding a VLAN
- Adding Static Routes
- Editing DNS
- Setting Up QoS
- Setting Up Users
- Setting Up 802.1X Authentication
- Daisy-Chaining Switches
- Connecting Access Points
- Modifying the MAC Address Table
- Checking Port Statistics
- Configuring Switch Topologies
- Configuring Basic Topologies
- Connecting the Switch Management Port to a Firewall
- Configuring a Common Uplink
- Configuring a Dedicated Uplink
- Configuring a Hybrid System with Common and Dedicated Uplinks
- Configuring Isolated Links for Management and Data Uplinks
- Configuring High Availability
- Configuring VLANs With Dedicated Uplinks
- Configuring a Link to SonicWall Access Points
- SonicWall Support
Configuring HA and PortShields With Dedicated Uplinks
To use the Switch with HA, you must first create an HA pair, and then add the Switch.
Switches cannot be added to HA pairs with Zero-Touch. See Adding a Switch to a Firewall Manually.
There are two ways to configure HA units with dedicated uplinks:
Was This Article Helpful?
Help us to improve our support portal