• SonicOS 7 Profile Objects
• Endpoint Security
• Bandwidth
• Quality of Service (QoS) Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • Enabling 802.1p
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled load
      • QoS Mapping
      • Managing QoS Marking
  • Glossary
• Content Filter
  • Managing CFS Profile Objects
    • About CFS Profile Objects
    • About UUIDs for CFS Profile Objects
    • Configuring CFS Profile Objects
      • Advanced Screen
      • Consent Screen
      • Custom Header Screen
    • Editing a CFS Profile Object
    • Deleting CFS Profile Objects
  • Applying Content Filter Objects
• DHCP Option
  • Configuring DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
    • Viewing Instance Properties in SonicOS
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• SonicWall Support
  • About This Document

AWS

Before setting up AWS objects or groups, be sure to configure the firewall with the AWS credentials that it needs to use. You can configure these in Network > System > AWS Configuration page. In addition, the Test Configuration button is available there to validate the settings before proceeding. See Configuring AWS Credentials in the SonicOS System Setup administration documentation for more information.

If AWS is not yet configured, the Object > Profile Objects > AWS page displays a link to the configuration page. Click on that to open the Network > System > AWS Configuration page.