SonicOS 7 Action Objects
BWM Option
CFS Action bandwidth Objects are similar to, but not the same as, bandwidth objects created on the Object > Profile Objects > Bandwidth page. CFS Action BWM objects do not appear on the Object > Profile Objects > Bandwidth page, and BWM bandwidth objects do not appear on the Object > Action Objects > Content Filter Actions page.
For information about bandwidth management, see the About Actions Using Bandwidth Management.
To create a CFS Action BWM object, Bandwidth Management must be enabled.
This screen appears in the Add CFS Action Object dialog. To open the dialog, navigate to Object > Action Objects > Content Filter Actions page and click the Add button at the top of the page.
To allocate bandwidth resources for content filtering
-
Under Operation Configurations, click the BWM tab.
-
From the Bandwidth Aggregation Method drop-down menu, choose how the BWM object is to be applied:
-
Per Policy (default)
-
Per Action
-
-
To enable BWM on outbound traffic, select the Enable Egress Bandwidth Management option. This option is not selected by default.
The Bandwidth Object drop-down menu and the Enable Tracking Bandwidth Usage option become active.
-
From the Bandwidth Object drop-down menu, choose either:
-
An existing BWM object.
-
Create new Bandwidth Object. The Add Bandwidth Object dialog displays. For information on creating a new bandwidth object, see Object > Profile Objects > Bandwidth chapter.
-
-
-
To enable BWM on inbound traffic, select the Enable Ingress Bandwidth Management option. This option is not selected by default.
The Bandwidth Object drop-down menu becomes active.
-
From the Bandwidth Object drop-down menu, choose either:
-
An existing BWM object.
-
Create new Bandwidth Object. The Add Bandwidth Object dialog displays. For information on creating a new bandwidth object, see Object > Profile Objects > Bandwidth chapter.
-
-
-
To track bandwidth usage, select the Enable Tracking Bandwidth Usage option. This option is not selected by default.
Enable Egress Bandwidth Management and/or Enable Ingress Bandwidth Management must be selected to activate the Enable Tracking Bandwidth Usage option.
Was This Article Helpful?
Help us to improve our support portal