SMA 10.2 Getting Started Guide for Hyper-V
Connecting to the Console
To Start, Connect, and Shut Down SMA 500v for Hyper-V
- Click SMA 500v for Hyper-V in the Virtual Machines list.
- If the State is Off, right-click to bring up the Start dialog box.
-
Click Start to start the machine.
- When Hyper-V is fully booted, click your SMA 500v for Hyper-V in the Virtual Machines list to connect.
- Right-click to bring up the dialog box.
-
Click Connect.
- The console screen appears, and a login prompt is displayed.
- To access the Command Line Interface, log in as admin. The password is the same as the password for the “admin” account configured on the appliance. The default is password.
- If the incorrect credentials are used, you can try again at the prompt.
-
Press Enter. This launches CLI.
- To shut down when the State is Running, right-click on the machine in the list to bring up the Shut Down dialog box.
-
Click Shut Down to shut down the machine.
Was This Article Helpful?
Help us to improve our support portal