• Secure Mobile Access 10.2 for the Series
• Deployment Scenarios Overview
  • Selecting a Deployment Scenario
  • SMA 210/410 and 500v Deployment Scenarios
• Connecting the SMA on a New DMZ
  • Connecting the SMA to the Gateway
  • Allowing a WAN to SMA Connection
  • Allowing an SMA to LAN Connection
• Connecting the SMA on an Existing DMZ
  • Connecting the SMA to the Gateway
  • Allowing WAN to LAN Connection
  • Allowing DMZ to LAN Connection
• Deploying SMA on the LAN
  • Connecting the SMA to the Gateway
  • Configuring SMA to LAN Connectivity
• Additional Configuration
  • Configuring the X0 IP Address
  • Configuring a Default Route
  • Adding a NetExtender Client Route
  • Setting Your NetExtender Address Range
  • Adding a New SMA Custom Zone
• Testing and Troubleshooting Your Remote Connection
  • Verifying a User Connection from the Internet
  • Policy > Access Rules Matrix View
• SonicWall Support
  • About This Document

Verifying a User Connection from the Internet

You can verify your connection using a remote client on the WAN.

To verify a User Connection from the Internet

1. From a WAN connection outside of your corporate network, launch a Web browser and enter the following:

   https://<WAN_IP_address_of_gateway_device>

2. When prompted, enter the User Name and Password.

3. Select LocalDomain from the drop-down menu and click Login. The SonicWall Virtual Office screen displays in your Web browser.

   

4. Click NetExtender to start the NetExtender client installation.
5. If prompted, click Install to complete the client installation.
6. Ping a host on your corporate LAN to verify your remote connection.

You have now successfully set up your SMA appliance.

It is easier for remote users to access the SMA appliance using a fully qualified domain name (FQDN) rather than an IP address. It is recommended that you create a DNS record to allow for FQDN access to your SMA appliance. If you do not manage your own public DNS servers, contact your ISP for assistance.