• Secure Mobile Access 10.2 for the Series
• Deployment Scenarios Overview
  • Selecting a Deployment Scenario
  • SMA 210/410 and 500v Deployment Scenarios
• Connecting the SMA on a New DMZ
  • Connecting the SMA to the Gateway
  • Allowing a WAN to SMA Connection
  • Allowing an SMA to LAN Connection
• Connecting the SMA on an Existing DMZ
  • Connecting the SMA to the Gateway
  • Allowing WAN to LAN Connection
  • Allowing DMZ to LAN Connection
• Deploying SMA on the LAN
  • Connecting the SMA to the Gateway
  • Configuring SMA to LAN Connectivity
• Additional Configuration
  • Configuring the X0 IP Address
  • Configuring a Default Route
  • Adding a NetExtender Client Route
  • Setting Your NetExtender Address Range
  • Adding a New SMA Custom Zone
• Testing and Troubleshooting Your Remote Connection
  • Verifying a User Connection from the Internet
  • Policy > Access Rules Matrix View
• SonicWall Support
  • About This Document

SMA 210/410 and 500v Deployment Scenarios

Gateway Appliance	Deployment Scenario	Requirements on Gateway Appliance
SonicOS 7 or higher: TZ Series NSa Series NSsp Series NSv Series	SMA on new DMZ	An unused interface NEW DMZ configured for NAT or Transparent Mode
	SMA on existing DMZ	One dedicated interface in use as an existing DMZ
	SMA on LAN	None

For a full list of the supported SonicWall firewall and firmware versions, see https://www.sonicwall.com/support/product-lifecycle-tables/

The following illustrations provide an overview of each deployment scenario:

• Overview of Scenario A: SMA on a New DMZ
• Overview of Scenario B: SMA on an Existing DMZ
• Overview of Scenario C: SMA on the LAN

Overview of Scenario A: SMA on a New DMZ

Overview of Scenario B: SMA on an Existing DMZ

Overview of Scenario C: SMA on the LAN